Enables shiftcut function, cuts fuel and / or ignition during gear shift.
Limits engine power during shifting.
Analog input (0-5v) wired to Analog input 7 (AIN 7) as an example, and at ~2.9v we think the driver is trying to shift, must of cource be calibrated to suit your need and every strain gauge has different voltage output in relation with force.
Note: the same table can also be used to downshift shift cut.
In this example, we also have a shift cut switch connected to AIN 11, therefore we use an internal output to create a condition.
Then in our shift cut settings, we use the shiftcut input (which comes from the above internal output) to trigger the actual shift cut function.