EGT (TYPE-K) 2CH amplifier 0-5v out

EGT-K is a precision thermocouple amplifier providing high accuracy temperature measurement in the range of 0-1250 C.

MaxxECU GEN2 TRACK, unit with basic accessories in box

Dodge 8HP70/75 RAM 1500 and RAM Ecodiesel, AWD to RWD Conversion Adapter Kit - 1350

Toyota HF2AV Transfer Case Adapter kit - BMW 8HP AWD

Toyota Supra MKIV (JZA80) - Crossmember Assembly

Ford Small Block 289 302 351C 351W 8HP 70/75/90/95 Dodge Adapter Kit

MaxxECU GEN2 TRACK, with Dual LSU 5.2, flying lead install kit

MaxxECU GEN2 TRACK, with LSU 5.2, flying lead install kit

MaxxECU Expansion Module, with connector kit.

MaxxECU Expansion Module, with 5m flying lead harness

MaxxECU GEN2 TRACK, with connector kit.

MaxxECU GEN2 TRACK connector 3 kit

34-pin superseal 1.0.
Including terminals and plugs to cover unused pins on the GEN2 TRACK.

Nissan RB/KA to 8HP 45/50/70/75 N47 N57 B57 B58 S58 Adapter Kit

Molex CMC PCB (GEN1 RACE 2)

Molex CMC PCB (GEN1 RACE 1)

34 WAY, 90 degree UP/DOWN SUPERSEAL 1.0 BOOT

34 WAY, 70 degree SUPERSEAL 1.0 BOOT

70 degree version is designed for use on ECUs and PDMs where two connectors are side-by-side.

34 WAY Superseal 1.0 BACKSHELL

For use on 34-way TE Superseal 1.0 connectors used on MaxxECU GEN2

26 WAY Superseal 1.0 BACKSHELL

For use on 26-way Superseal 1.0 connectors used on MaxxECU GEN2 and PDM Modules

BLANK, icon can keypad

15mm icon for CAN keypads

Pneumatic feedthrough push-in fitting

For MaxxECU GEN1 STREET, SPORT, RACE.

Ignition module 3 output 7-pin connector (Bosch)

Fuel injector 627cc (high impedance) Bosch EV14

Compatible with petrol and ethanol fuel.

26 WAY, 90 degree UP/DOWN SUPERSEAL 1.0 BOOT

Rubber boot for the Superseal 1.0 connectors used on MaxxECU GEN2 and PDM

26 WAY, 70 degree SUPERSEAL 1.0 BOOT

70 degree version is designed for use on ECUs and PDMs where two connectors are side-by-side.